Technical Support:
158-7527-1139
Product Center
Hot News
Popular keywords
LD12 series is a high-temperature resistant, long-life laser dust sensor. Based on optical scattering and Luftmy's unique dust source identification technology, it accurately calculates suspended particles of different sizes.
The MH201 gas sensor module based on MEMS gas-sensing elements is used to test H2 gas content in the ambient air. Test data is communicated via I²C or UART interface. The MEMS element surface can be protected with a filter membrane. The gas sensor module can select SMD or ribbon cable assembly as needed.
The CO208 dual-channel infrared carbon dioxide sensor is a dual-channel NDIR sensor. The development of the dual-channel technology is based on the unique absorption characteristics of CO₂ gas. The signal of the measurement channel varies with changes in CO₂ concentration, while the signal of the reference channel is affected only by sensor drift. The reference channel performs real-time compensation for the measurement channel, ensuring stable and reliable measurements during long-term operation.
The MTHO3A1 temperature and humidity sensor module, based on a MEMS gas-sensing element, is used to measure ambient temperature and humidity as well as the concentration of harmful substances in the air. Measurement data are transmitted via I²C or UART interfaces. The surface of the MEMS gas-sensing element can be protected with a filter membrane, and the air quality sensor module can be assembled using either a plug-in board or SMT mounting, depending on requirements.
The semiconductor LD-VOC series air quality module uses advanced semiconductor gas-sensing elements.
This sensor features extremely high sensitivity to volatile organic gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol, and cigarette smoke.
After aging, tuning, and calibration, the module delivers **excellent consistency and very high sensitivity.
The DM744 is a real-time monitoring sensor for R744 (CO2) refrigerant leaks. It utilizes patented technology to ensure high reliability and resistance to aging.
The LD5100 uses optical scattering to precisely detect suspended particles. It outputs counts for 5 different particle sizes (pcs/28.3L) with error values meeting JJF1190 requirements.
The LD5000 is an optical scattering sensor that accurately calculates the number of particles across six channels. Its efficiency meets the JJF 1190-2008 calibration standards for dust particle counters.
The LD1050 laser particle counter sensor utilizes an industrial-grade long-life laser and automotive-grade turbine fan to ensure stable, reliable, and precise output of particle counts. It uses RS485 communication for long-distance transmission.
The LD3003 laser dust particle counter sensor is based on optical scattering principles to accurately detect the number of suspended particles of different sizes per unit volume. It outputs 6 channels of data simultaneously, meeting JJF1190-2008 calibration standards.
LD12 is an oil fume sensor specifically for catering monitoring. It uses side-stream sampling with mist removal and intelligent particle algorithms to ensure accurate detection of fume concentration changes. Self-cleaning technology extends the sensor lifespan.
LD10 is an oil fume sensor specifically for catering monitoring. It uses side-stream sampling with a built-in mist removal device and intelligent particle recognition algorithms. Innovative lens self-cleaning technology protects the sensor from oil pollution and extends service life.
