Technical Support:
158-7527-1139
Product Center
Hot News
Popular keywords
The MCH4 methane sensor module based on MEMS gas-sensing elements is primarily used to test natural gas leaks, providing relative equivalent concentrations of methane gas in the air. Test data is communicated via I²C, UART, or high/low level interfaces. The MEMS element surface can be protected with a filter membrane. The sensor module can select pin or socket assembly as needed.
The MC2H6O alcohol gas sensor module based on MEMS gas-sensing elements is used to test alcohol content in human breath. Test data is communicated via I²C or UART interface. The MEMS element surface can be protected with a filter membrane. The gas sensor module can select SMD or ribbon cable assembly as needed.
The MCO02 gas sensor module based on MEMS gas-sensing elements is used to test CO gas content in the ambient air. Test data is communicated via I²C and UART interfaces. The MEMS element surface can be protected with a filter membrane. The sensor module can select SMD or ribbon cable assembly as needed.
The MH201 gas sensor module based on MEMS gas-sensing elements is used to test H2 gas content in ambient air. Test data is communicated via I²C or UART interface. The MEMS element surface can be protected with a filter membrane. The gas sensor module can select SMD or ribbon cable assembly as needed.
The MC2H4 gas sensor module based on MEMS gas-sensing elements is used to test C2H4 gas content in the ambient air. Test data is communicated via I²C or UART interface. The MEMS element surface can be protected with a filter membrane. The gas sensor module can select SMD or ribbon cable assembly as needed.
The MH201 gas sensor module based on MEMS gas-sensing elements is used to test H2 gas content in the ambient air. Test data is communicated via I²C or UART interface. The MEMS element surface can be protected with a filter membrane. The gas sensor module can select SMD or ribbon cable assembly as needed.
The MTHO3A1 temperature and humidity sensor module, based on a MEMS gas-sensing element, is used to measure ambient temperature and humidity as well as the concentration of harmful substances in the air. Measurement data are transmitted via I²C or UART interfaces. The surface of the MEMS gas-sensing element can be protected with a filter membrane, and the air quality sensor module can be assembled using either a plug-in board or SMT mounting, depending on requirements.
The MTHO3A module based on MEMS gas-sensing elements is used to test ambient temperature, humidity, and harmful substance content in the air. Test data is communicated via I²C or UART interface. The MEMS element surface can be protected with a filter membrane. The air quality sensor module can select plug-in or SMT assembly as needed.
