Technical Support:
158-7527-1139
Product Center
Hot News
Popular keywords
The LD19-THC integrated module features high stability, fast response, and strong anti-interference. Uses UART digital interface for easy integration and stable performance.
The LD19 is a high-precision particulate matter concentration sensor based on the Laser Mie Scattering theory. It can continuously collect and calculate the number of suspended particles of different sizes in the air per unit volume—namely the particulate matter concentration distribution—and convert this into mass concentration, outputting it via a universal digital interface. This sensor can be embedded in various instruments or environmental improvement equipment related to suspended particulate concentration to provide timely and accurate data.
The MCO02 gas sensor module based on MEMS gas-sensing elements is used to test CO gas content in the ambient air. Test data is communicated via I²C and UART interfaces. The MEMS element surface can be protected with a filter membrane. The sensor module can select SMD or ribbon cable assembly as needed.
The LF12 is a sensor that does not require an internal fan; its driving air source comes from the host device, which overcomes the defects caused by fans in traditional laser sensors on the market. A high-illuminance and uniform light-sensitive area is set in the center of the scattering cavity inside the housing. A semiconductor laser generator and detector are set outside the scattering cavity. The detector is connected via an amplification circuit to a microcontroller unit that can calculate the particle diameter and quantity based on the amplification circuit’s input signals.
The LD15V integrated air quality sensor is a cost-effective multi-parameter integrated module. It can output real-time measurements of VOC concentration, CO2, formaldehyde, and mass concentrations of PM1.0, PM2.5, and PM10 particles. It features stable performance, full metal shielding, strong anti-interference ability, compact design, and rich interfaces. Widely used in high-end air purifiers, fresh air systems, air conditioners with purification functions, air quality detectors, and consumer electronics accessories.
The LD15T integrated sensor module outputs temperature, humidity, and PM1.0/2.5/10 data. Stable, metal-shielded, and compact, it is suitable for high-end appliances and air quality detectors.
The LD10 laser dust sensor series is a high-temperature resistant, long-life laser dust sensor. Based on optical scattering and LUFTMY's unique dust source identification technology, it accurately detects particle counts across sizes in unit volumes. It outputs accurate PM2.5 concentrations via mathematical algorithms and scientific calibration. The conductive shell effectively shields electromagnetic interference.
The integrated air quality sensor LD10T is a cost-effective multi-parameter air quality sensor module capable of real-time measurement and output of temperature, humidity, and PM (1.0, 2.5, 10) particulate mass concentration. It features stable performance, full metal shielding, good anti-interference, and compact design.
The MH201 gas sensor module based on MEMS gas-sensing elements is used to test H2 gas content in ambient air. Test data is communicated via I²C or UART interface. The MEMS element surface can be protected with a filter membrane. The gas sensor module can select SMD or ribbon cable assembly as needed.
The LD09 series is a high-temperature resistant, long-life, ultra-thin laser dust sensor. Based on the principle of optical scattering and combined with LUFTMY's unique dust source intelligent identification technology, it can accurately detect and calculate the number of particles of different sizes in a unit volume across various environments. Through mathematical algorithms and scientific calibration, it achieves accurate PM2.5 mass concentration output. The full metal shell effectively shields electromagnetic interference.
The MC2H4 gas sensor module based on MEMS gas-sensing elements is used to test C2H4 gas content in the ambient air. Test data is communicated via I²C or UART interface. The MEMS element surface can be protected with a filter membrane. The gas sensor module can select SMD or ribbon cable assembly as needed.
The LD11 series is a high-temperature resistant, long-life, ultra-thin laser dust sensor. Based on the principle of optical scattering and combined with LUFTMY's unique dust source intelligent identification technology, it can accurately detect and calculate the number of particles of different sizes in a unit volume across various environments. Through mathematical algorithms and scientific calibration, it achieves accurate PM2.5 mass concentration output. The full metal shell effectively shields electromagnetic interference, providing excellent anti-interference performance.
